{"title":"Water Meth Kits","description":null,"products":[{"product_id":"snow-performance-stage-ii-boost-cooler-forced-induction-water-injection-kit","title":"Snow Performance Stage II Boost Cooler Forced Induction Water Injection Kit","description":"Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged\/turbocharged) and uses a progressive controller with built in manifold absolute pressure (MAP) sensor that proportionally injects more or less water-methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. Recommended for all gas forced induction vehicles using a turbo or centrifugal supercharger. Comes with adjustable progressive VC-20 engine mount controller and easy to install quick-connect fittings.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654883422528,"sku":"SNOSNO-20010","price":520.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/089d6e082be43e87d434202051876802.jpg?v=1716244288"},{"product_id":"snow-performance-gas-stage-i-the-new-boost-cooler-forced-induction-water-injection-kit","title":"Snow Performance Gas Stage I The New Boost Cooler Forced Induction Water Injection Kit","description":"Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged\/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with easy to install quick-connect fittings and 1\/4\" high temp nylon tubing.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654884634944,"sku":"SNOSNO-201","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/089d6e082be43e87d434202051876802_e5b9f4c5-6d88-4229-8796-5c4944ee2fc4.jpg?v=1716244297"},{"product_id":"snow-performance-stg-1-boost-cooler-f-i-water-injection-kit-incl-ss-braided-line-and-4an-fittings","title":"Snow Performance Stg 1 Boost Cooler F\/I Water Injection Kit (Incl. SS Braided Line and 4AN Fittings)","description":"Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged\/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump\/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654885585216,"sku":"SNOSNO-201-BRD","price":479.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/328c12e9e1f18660e175aef6cb34397e.jpg?v=1716244308"},{"product_id":"snow-performance-gas-stg-2-the-new-boost-cooler-f-i-water-inj-kit","title":"Snow Performance Gas Stg. 2 The New Boost Cooler F\/I Water Inj Kit","description":"Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged\/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 (ISO 9001 Manufactured) controller offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors.. Comes with easy to install quick-connect fittings and 1\/4\" high temp nylon tubing.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654886469952,"sku":"SNOSNO-210","price":583.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/089d6e082be43e87d434202051876802_5b4ae06a-18b5-4309-9009-887a99c02e4f.jpg?v=1716244325"},{"product_id":"snow-performance-stg-2-boost-cooler-f-i-prog-water-injection-kit-ss-braided-line-4an-fittings","title":"Snow Performance Stg 2 Boost Cooler F\/I Prog. Water Injection Kit (SS Braided Line 4AN Fittings)","description":"Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged\/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2 introduces the VC-50 Controller (ISO 9001 Manufactured). The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors. Comes with 4AN fittings and stainless steel braided line to mount pump\/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654887551296,"sku":"SNOSNO-210-BRD","price":687.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/328c12e9e1f18660e175aef6cb34397e_7f33dbb2-2cb1-4c97-9b53-043b0a982db6.jpg?v=1716244337"},{"product_id":"snow-performance-stg-2-boost-cooler-f-i-prog-water-injection-kit-ss-braided-4an-fitting-no-tank","title":"Snow Performance Stg 2 Boost Cooler F\/I Prog. Water Injection Kit (SS Braided 4AN Fitting) - No Tank","description":"Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection system is available for all forced induction applications (supercharged\/turbocharged). The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2 introduces the VC-50 Controller (ISO 9001 Manufactured). The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors. Comes with 4AN fittings and stainless steel braided line to mount pump\/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654887878976,"sku":"SNOSNO-210-BRD-T","price":687.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/069e6e5dcaa4d5cbdf24900e7d9a8062.jpg?v=1716244343"},{"product_id":"snow-performance-stg-1-boost-cooler-td-water-injection-kit-incl-red-hi-temp-tubing-quick-fittings","title":"Snow Performance Stg 1 Boost Cooler TD Water Injection Kit (Incl. Red Hi-Temp Tubing\/Quick Fittings)","description":"Decrease EGTs and increase HP in your diesel by 65HP+ in the most cost effective water-methanol injection kit on the market! Utilizing a adjustable boost pressure switch and dual nozzles to deliver precise amounts of water-methanol once 30 boost PSI has been reached (Boost Engagement Adjustable, 30 PSI Boost Hobbs Switch Included). Recommended for all high boost and competition diesels looking to increase HP while decreasing EGTs when on heavy throttle. Comes with easy to mount race ready 3QT tank, high flow check valve, quick-connect fittings, 300 PSI UHO Pump, and LED alert system.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654889058624,"sku":"SNOSNO-301","price":416.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/089d6e082be43e87d434202051876802_48c24466-fa2d-4fde-b837-3f1290f22a04.jpg?v=1716244356"},{"product_id":"snow-performance-stage-3-efi-2d-map-progressive-water-injection-kit","title":"Snow Performance Stage 3 EFI 2D Map Progressive Water Injection Kit","description":"The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your EFI (electronic fuel injected) and forced induction (turbocharged\/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel injector pulse width to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel injector pulse width into the mix allows the injection curve to be extended past specific boost points for greater range\/control. None invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable Stage 3 water-meth controller, 1\/4\" High Temp Nylon line and easy to install quick-connect fittings.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654889353536,"sku":"SNOSNO-310","price":729.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/13e959e1fe1cfcce577ec74815c9772b.jpg?v=1716244369"},{"product_id":"snow-performance-boost-cooler-stg-3-di-2d-map-progressive-water-injection-kit","title":"Snow Performance Boost Cooler Stg 3 DI 2D Map Progressive Water Injection Kit","description":"The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged\/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel pressure sensor input to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range\/control. None invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable Stage 3 water-meth controller, 1\/4\" High Temp Nylon line and easy to install quick-connect fittings.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654889386304,"sku":"SNOSNO-320","price":729.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/c7c07304daee877437d4f6fd696ecae7.jpg?v=1716244372"},{"product_id":"snow-performance-stg-3-boost-cooler-di-2d-map-prog-water-injection-kit-ss-braided-line-4an","title":"Snow Performance Stg 3 Boost Cooler DI 2D MAP Prog. Water Injection Kit (SS Braided Line \u0026 4AN)","description":"The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged\/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel pressure sensor input to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range\/control. None invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump\/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48654889976128,"sku":"SNOSNO-320-BRD","price":833.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/328c12e9e1f18660e175aef6cb34397e_6f04d9b6-5070-4742-a4e6-f9579b981dd7.jpg?v=1716244383"},{"product_id":"snow-performance-stg-2-boost-cooler-prog-engine-mount-water-injection-kit-ss-braid-line-4an","title":"Snow Performance Stg 2 Boost Cooler Prog. Engine Mount Water Injection Kit (SS Braid Line \u0026 4AN)","description":"Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged\/turbocharged) and uses a progressive controller with built in manifold absolute pressure (MAP) sensor that proportionally injects more or less water-methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. Comes with adjustable progressive VC-20 engine mount controller, 4AN fittings, and stainless steel braided line to mount pump\/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":48870335185216,"sku":"SNOSNO-20010-BRD","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/328c12e9e1f18660e175aef6cb34397e_add3ec51-2068-4064-a3ac-1441deb52b46.jpg?v=1717555427"},{"product_id":"snow-performance-stage-ii-boost-cooler-forced-induction-water-injection-kit-w-o-tank","title":"Snow Performance Stage II Boost Cooler Forced Induction Water Injection Kit w\/o Tank","description":"Unlock 50-70+HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged\/turbocharged) and uses a progressive controller with built in manifold absolute pressure (MAP) sensor that proportionally injects more or less water-methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. Comes with adjustable progressive VC-20 engine mount controller, 4AN fittings, and stainless steel braided line to mount pump\/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.","brand":"Snow Performance","offers":[{"title":"Default Title","offer_id":51378615320896,"sku":"SNOSNO-20010-T","price":520.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/1391\/6224\/files\/a18c21d5f2d30f4d3a000d81e3406dcdL.jpg?v=1766525399"}],"url":"https:\/\/www.damondauto.com\/collections\/water-meth-kits.oembed","provider":"DamondAuto","version":"1.0","type":"link"}